How to Apply TK99 Deck Coating

Cleaning:

Remove/replace rotted wood and splinters, fill in major cracks/holes with paintable wood putty.
Clean deck with waterborne degreaser (i.e. citrus degreaser).
New deck will only require a light cleaning.
Old decks require a more thorough cleaning with special attention to oily spots.
Rinse thoroughly with hose/pressure washer and allow for the wood to completely dry.
Repeated cleaning of oily spots might be necessary to ensure proper adhesion.
A fan will increase air flow and reduce drying time.

Apply at minimum of 60°F at a thickness of 0.7-1.0mm (30-40 mils) with the recommended 3/8” foam nap for semi-smooth to smooth surface roller.
Roll on coating assuring 100% coverage. Let coating dry to touch (estimated 1-2 hours dependent on humidity, temperature and air movement).
When applying the second coat, be sure to apply on a touch dry coating and use generously to maximize protection and strength of the coating.
Do not apply if the temperature expected to be below 60°F.
Apply minimum 2 coats.
Tekton 99 can be cleaned with water (damp cloth) while wet, remove mechanically when dried.

Do not expose coating to temperatures below 60°F during the application and the curing process.
At 77°F and RH 55%, the trailer floor coating will be dry to touch after 1-2 hours,
After 6 hours only light foot traffic is recommended.
72 hours after application the coating will be fully cured.
Allow the coating to fully cure before exposing to water, cold weather and heavy traffic.