Spray gun designed for spraying undercoating, rustproofing and other thick liquids.
Professional rustproofing gun designed to apply protective coatings inside doors, beams, rocker panels and other cavities.
Professional rust proofing gun designed to apply protective coatings inside doors, beams, rocker panels and other cavities. This gun allows for pressure to build up inside the tank assuring the coating will be atomized at the tip of the wand and provide total coverage of the rustproofing inside the cavity.
All metal gun designed for industrial use by body shops, car dealers and rust proofing professionals.
Equipped with a brass spray tip to spray directly our of the gun and comes with two spray wands that can be attached with a quick coupler. The mist wand is 5 ft. long, the hand held (90°) wand is 30 inches long.
Use to apply rustproofing coatings such as Texton 34 Cavity Wax, Fluid Film, Wax Oil, etc.
Not recommended for application of undercoatings.
Upon finishing the rustproofing task, purge left over product from the wands by pulling the trigger half way. Rinse wand with solvent/water to dissolve product left inside the wands. Always check the MSDS and tech sheets supplied with the product sprayed to make sure you are using an appropriate cleaner.
When spraying cleaning solvents with the gun, ALWAYS close the Air Control Knob (BS19) first. Atomized solvents are extremely flammable. Properly dispose of cleaning solvents as per local regulations.